#7002 2 x used keg system disconnect tap & 2.6kg co2 S

This Homebrew Kegerator Kit comes with the beer parts you will need to successfully convert your refrigerator into a draft beer dispenser All the draft beer parts are of the high quality which are designed and built to last.This kit is designed to save you quite a lot of time and money to buy different accessories for your home brew needs.

The kegs are made from food grade 316 stainless steel and originally from Coca Cola Company. These kegs are used but still in a quite good condition. They will probably last you a lifetime if you maintain it well.

All kegs have been individually checked to ensure they are in full working order and can hold pressure well. And the gas/liquid post is reinstalled with brand-new ones. We changed to the new posts and test the keg to make sure you won’t get a lemon. This will not only save you the time of testing the keg, also saving you around $40 for the new posts.

 All kegs have been cleaned from our warehouse manually to ensure they are clean both inside and outside. But it is recommended to clean the inside of the keg thoroughly before you fill your beer. 

The kegs will come with the manual pressure relief valves with the pulling ring. The pressure relief valve allows the keg to be depressurised and "burped" off when doing the initial carbonation after filling. It allows you to manually vent the keg as you like. You may want to do that for the purpose of removing the keg lid or to vent excess pressure in an attempt to get down to a lower pressure. Having a manual PRV valve is a much better option than the auto PRV for home brewers.

 Please note the gas post is notched to tell the difference from the liquid post

KEG Dimensions: Diameter: 23cm 
Height: 56cm or 58cm
Post Type 1: New 9/16" - 18 Ball Lock (for keg with full circle handle)
Post Type 2: New 19/32”-18 Ball Lock (for keg with notched top)
Volume of contents: 19 Litres

Long Shank Beer Tap with auto close spring for dispensing from your kegging system. It has a threaded shank 80mm long, making it ideal for installing through fridge doors. The long shank taps are for people who would like to make their own Kegerator or mount the tap into a cool room wall or fridge door. Just drill a 21mm hole and the shank will slot straight in.

2X Reconditioned Ball Lock Cornelius Keg
2X 100mm Long shank with beer tap
1X 2 way Manifold
1X Brand new 2.6kg CO2 Gas Cylinder (with full CO2)
1X Brand new Regulator
2X Beer/liquid Disconnect
2X Gas disconnect
8 Meters X Beer Line
3 Meters X Gas Line
10X Stainless Steel Clamps
1X wrench for Beer tap

Please Note: The photos are used for illustration only. The regulator or the gas bottle might be different from the photo shown because of the batch difference or batch enhancement.